iCount Attendance System for Business and Classroom
Questions? 1-833-686-1055Bulk Pricing Options ResellersMy Account

iCount – 907 20 Key Relegendable Membrane, 2 lines LCD USB


0 out of 5

iCount Attendance System for Bus and Classroom

 MOQ for  910-iCount-WiFi  is 100 pcs per order
 Lead time is 4-6 weeks






iCount 907



iCount – 907 20 Key Relegendable Membrane, 2 lines LCD USB

Additional Information


Included PC Connections

 » Serial RS232C Host Port 
 » USB HID Keyboard Device 
 » Optional Ethernet Connection
  Card/Tag Reader Options
 » Infrared Barcode Scanner 
 » Barcode Card Swipe Reader 
» RFID Badge/Tag Reader 
» Custom Magnetic Card Option

The Genovation iCount is the perfect device for keeping track of students, employees, attendees and riders as they utilize classroom space or ride on buses. The iCount is available with many ID reading options to fit your circumstances and budget. Child or senior left behind? Never again!The iCount is a user-friendly solution that operates standalone (only 5v DC is required), shows the running headcount (tally) and will keep track of who is “IN’ and who is “OUT” including their ID numbers. No PC is required, however the unit can connect to a PC and upload the information to a document or spreadsheet.

  • Take attendance/rollcall of pupils in class
  • Track students and seniors on bus field trips
  • Track attendees at a conference or trade show

The unit comes supplied with cables for both USB and RS232 PC connections and a 120v AC to 5v DC wall adapter. Optional power adapters are available for running the iCount from your 12v vehicle power.

  • Easy to set up and use
  • Approximately one second scan time per student
  • 2 x 16 super-twist back-lit LCD (sealed)
  • Detachable cables for RS-232 and USB (both included)
  • Internal buzzer/alarm/audible key beeper
  • “Flash” memory holds ID numbers and check-in status
  • 1 year warranty
Type No
Interface No
Programmable No
Color No
Dimensions 18.5cm x 15.0cm x 5.3cm (7.25″ x 6.0″ x 2.25″)
Weight 0.6500
Operating Systems Supported No
Mechanical Data:
Life Cycles 2 x 107
Key Type Tactile sealed membrane (20,000,000+ operations)
Operating Force 0.686N (79gf)
Color Two tone, light and dark gray
Number of Keys 20
Electrical Data:
Power Supply 5v DC, 60ma
(not including card reader or network option).
400mA adapter included for RS232, USB is bus powered.
Memory FLASH+EEPROM non-volatile, >100 year retention
LCD Display:
Type 2×16 Super-Twist “STN”
Backlight Yes (LED)
Light Emitting Diodes:
Quantity 2
Color(s) 1 Green, 1 Red
Length x Width x Height 18.5cm x 15.0cm x 5.3cm (7.25” x 6.0” x 2.25”)
Operating Temperature 0 to 70 degrees C (32 to 158 degrees F)
Operating Humidity 0% to 98% non-condensing
FCC Rating Class B Device
Keypad (no options) 0.3kg (0.65lbs)
Single Keypad Ship Weight 1.0kg (2.0lbs)
Interface: RS232
Type Serial RS232C compliant
Cable Length Included 6ft (1.8m), detachable via RJ-45 connection
Optional 25ft (7.6m) cable available
Connection RJ-45 to DB-9 female
Data Rate 9600 baud
Interface: USB
Type USB 1.0, 1.1 & 2.0 compliant, bus powered
Cable Length Included 6ft (1.8m), detachable via RJ-45 connection
Optional 25ft (7.6m) cable available
Connection RJ-45 to USB standard Type A
Data Rate USB Full Speed
Interface: Ethernet
Type 10Base-T/100Base-TX (Auto-Sensing)
Cable Length Not included
Connection RJ-45
Protocols TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP
Interface: Wi-Fi
Type 802.11 b/g wireless networking
Range Up to 328 feet indoors
Output Power 14dBm +2.0 dBm/-1.5 dBm (does not include antenna gain)
Sensitivity -91dBm @ 1Mbps
Internal Reader Options:
Barcode Card/Tag/Label Scanner Front firing, visible red beam
Slotted Barcode Card Reader Infrared swipe reader for Barcode ID cards, located on right hand side
Magnetic Card Reader Mag card swipe reader for ATM, driver’s license, credit cards, etc. Located on right hand side.
RFID Card/Label/Tag Reader 125kHz or 13.56MHz MiFARE MF1/Ultralight cards, labels and tags. Located on left hand side.
RS232 Ext. Wedge Device Rear panel RJ45 input jack allows external RS232 serial device wedging/pass-thru. 1200 to 115.2 k baud rate. Auto converts to host baud rate or USB.



Ordering Information
Part Number: Description:
801-RJ iCount firmware installed in MiniTerm 901-RJ
907-RJ iCount firmware installed in MiniTerm 907-RJ.
For card reader ordering information, see the 907 part number builder.
Manuals File(s) File Type
iCount User Manual
(Ver 1.00, Aug. 2009, 0.5MB)
Download Now PDF File

Additional information

Weight 2 lbs
Dimensions 6.88 × 6.1 × 1.5 in


There are no reviews yet!

Be the first to write a review

Delivery and Returns Content description.

More Options

  • The ControlPad CP24-MAC-USBHID is versatile, 24-key programmable USB Multimedia keyboard for Macintosh Users
    Your custom macro key definitions are stored within the CP24-MAC-USBHID’s internal FLASH memory making it a true “PLUG and PLAY” programmable USB keyboard.

  • The Genovation MiniTerm 905 is a fully programmable LCD mini-terminal and supports simple and complex re-programmable key macros and system configurations. Includes a detachable serial (RS232) and USB cables for easy setup and different applications.

    MiniTerm 905, 906, 907 will now have a USB Type B connection on the back of the unit and will be shipped with a standard 6 foot USB Type B to Type A cable only.

    MiniTerm 905 Card/Tag Reader is also available in these configurations:

    • Magnetic Card Swipe Reader
    • Barcode Swipe Reader
    • Barcode Scanner
    • Biometrics Scanner
    • Wireless
    • Wedge
    • Ethernet

     MOQ for  905-W WiFi and 905-F Finger print Reader is 100 pcs per order
     Lead time is 4-6 weeks
  • The ControlPad CP48-USB Virtual Serial is a versatile, 48-key programmable USB Serial ASCII keypad.

    This allows your application to open and connect to this COM port to communicate with the ControlPad CP48-USB Virtual Serial Keypad
    Your custom macro key (Assembly lead time is 3 days for this product)